State Metal Industries produces standard and custom specification aluminum alloy ingot and sows.
We primarily produce the following alloys:
-319.1 -A380.1
-356.1 -383.1
-A360.1 -A413.1
Along with these alloys, State Metal Industries can also manufacture other chemistry specific ingot and sows to meet the needs of our consumers.
Experienced production supervisors and highly skilled technical staff allow us to serve as an aluminum resource for some of the best domestic and international manufacturers.
State Metal Industries ships product worldwide. If you need highest-quality state-of-the-art ingots and maximum value for your scrap, choose State Metal Industries
Aluminum alloys are alloys in which aluminum is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminum is used for wrought products, for example rolled plate, foils and extrusions. Cast aluminum alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminum alloy system is Al–Si, where the high levels of silicon contribute to give good casting characteristics. Aluminum alloys are widely used in engineering structures and components where lightweight or corrosion resistance is required.
Be sure to like State Metal Industries On Facebook by clicking HERE and follow us on Twitter by clicking HERE